Bescottee » Uncategorized

2015/11/21時点の Intel Edison Firmware

admin — Fri, 20 Nov 2015 18:28:40 +0000

Intel Edison のファームウェアが更新されたという情報を得たので、焼いてみました。

Intel® Edison Board Software Downloadsから以下をダウンロードしました。

PhoneFlashToolLite_5.3.2.0_mac64.pkg
m_iot_dev_kit_2015.0.023.tar.gz
edison-iotdk-image-280915.zip
HoRNDIS-rel7.pkg

MBP の左のUSBポートに電源向けUSB、右のポートにシリアルコンソール向けUSBを挿したら ./flashall.sh がうまく動きました。
逆の場合は./flassall.sh が

Did you plug and reboot your board?
のまま進まない症状が出ました。

備忘のため、コマンドとログをメモしておきます。

$ ./flashall.sh Using U-Boot target: edison-blankcdc Now waiting for dfu device 8087:0a99 Please plug and reboot the board Timed out while waiting for dfu device 8087:0a99 DEBUG: lsusb Bus 021 Device 001: ID 05ac:8406 Apple Inc. Internal Memory Card Reader Serial: 000000000820 Bus 020 Device 005: ID 0403:6001 Future Technology Devices International Limited FT232R USB UART Serial: AJ035GT1 Bus 020 Device 018: ID 05ac:0259 Apple Inc. Apple Internal Keyboard / Trackpad Bus 020 Device 002: ID 0a5c:4500 Broadcom Corp. BRCM20702 Hub Bus 020 Device 004: ID 05ac:8289 Apple Inc. Bluetooth USB Host Controller Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub DEBUG: dfu-util -l dfu-util 0.8


Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.

Copyright 2010-2014 Tormod Volden and Stefan Schmidt

This program is Free Software and has ABSOLUTELY NO WARRANTY

Please report bugs to dfu-util@lists.gnumonks.org

Did you plug and reboot your board? If yes, please try a recovery by calling this script with the --recovery option taro:edison-iotdk-image-280915 tkawashita$ ./flashall.sh Using U-Boot target: edison-blankcdc Now waiting for dfu device 8087:0a99 Please plug and reboot the board dfu-util: Device has DFU interface, but has no DFU functional descriptor Flashing IFWI dfu-util: Device has DFU interface, but has no DFU functional descriptor Transfer size must be specified Flashing U-Boot Flashing U-Boot Environment Flashing U-Boot Environment Backup Rebooting to apply partition changes Now waiting for dfu device 8087:0a99 Flashing boot partition (kernel) Flashing rootfs, (it can take up to 5 minutes... Please be patient) Rebooting U-boot & Kernel System Flash Success... Your board needs to reboot to complete the flashing procedure, please do not unplug it for 2 minutes.

*** Ready to receive application ***


U-Boot 2014.04 (Jun 19 2015 - 12:05:55)
       Watchdog enabled

DRAM:  980.6 MiB

MMC:   tangier_sdhci: 0

In:    serial

Out:   serial

Err:   serial

Writing to redundant MMC(0)... done

Writing to MMC(0)... done

Hit any key to stop autoboot:  0

Target:ifwi

Partitioning using GPT

Writing GPT: success!

Saving Environment to MMC...

Writing to redundant MMC(0)... done

Partitioning already done...

Saving Environment to MMC...

Writing to MMC(0)... done

GADGET DRIVER: usb_dnl_dfu

#

DFU complete CRC32: 0x6ad212b0

DOWNLOAD ... OK

Ctrl+C to exit ...

#

DFU complete CRC32: 0x9cb56567

DOWNLOAD ... OK

Ctrl+C to exit ...

#

DFU complete CRC32: 0x9cb56567

DOWNLOAD ... OK

Ctrl+C to exit ...

resetting ...
******************************

PSH KERNEL VERSION: b0182b2b

                WR: 20104000

******************************
SCU IPC: 0x800000d0  0xfffce92c
PSH miaHOB version: TNG.B0.VVBD.0000000c
microkernel built 11:24:08 Feb  5 2015
******* PSH loader *******

PCM page cache size = 192 KB

Cache Constraint = 0 Pages

Arming IPC driver ..

Adding page store pool ..

PagestoreAddr(IMR Start Address) = 0x04899000

pageStoreSize(IMR Size)          = 0x00080000
*** Ready to receive application ***
U-Boot 2014.04 (Jun 19 2015 - 12:05:55)
       Watchdog enabled

DRAM:  980.6 MiB

MMC:   tangier_sdhci: 0

In:    serial

Out:   serial

Err:   serial

Writing to redundant MMC(0)... done

Writing to MMC(0)... done

Hit any key to stop autoboot:  0

Target:blank

Partitioning using GPT

Writing GPT: success!

Saving Environment to MMC...

Writing to redundant MMC(0)... done

Flashing already done...

GADGET DRIVER: usb_dnl_dfu

#

DFU complete CRC32: 0xb98db2f8

DOWNLOAD ... OK

Ctrl+C to exit ...

######################################################################################################################

DFU complete CRC32: 0x5601e158

DOWNLOAD ... OK

Ctrl+C to exit ...

resetting ...
******************************

PSH KERNEL VERSION: b0182b2b

                WR: 20104000

******************************
SCU IPC: 0x800000d0  0xfffce92c
PSH miaHOB version: TNG.B0.VVBD.0000000c
microkernel built 11:24:08 Feb  5 2015
******* PSH loader *******

PCM page cache size = 192 KB

Cache Constraint = 0 Pages

Arming IPC driver ..

Adding page store pool ..

PagestoreAddr(IMR Start Address) = 0x04899000

pageStoreSize(IMR Size)          = 0x00080000
*** Ready to receive application ***
U-Boot 2014.04 (Jun 19 2015 - 12:05:55)
       Watchdog enabled

DRAM:  980.6 MiB

MMC:   tangier_sdhci: 0

In:    serial

Out:   serial

Err:   serial

Hit any key to stop autoboot:  0

Target:blank

Partitioning already done...

Flashing already done...

GADGET DRIVER: usb_dnl_dfu

reading vmlinuz

5434848 bytes read in 134 ms (38.7 MiB/s)

Valid Boot Flag

Setup Size = 0x00003c00

Magic signature found

Using boot protocol version 2.0c

Linux kernel version 3.10.17-poky-edison+ (sys_dswci@tlsndgbuild004) #1 SMP PREEMPT Fri Jun 19 12:06:40 CEST 2015

Building boot_params at 0x00090000

Loading bzImage at address 00100000 (5419488 bytes)

Magic signature found

Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=rndis systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=8211587d07244d27cfb43ab8989dc867 g_multi.dev_addr=02:00:86:9d:c8:67 platform_mrfld_audio.audio_codec=dummy"
Starting kernel ...
[    1.602492] snd_soc_sst_platform: Enter:sst_soc_probe

[    2.006424] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk

[    2.024564] pmic_ccsm pmic_ccsm: Battery Over heat exception

[    2.024656] pmic_ccsm pmic_ccsm: Battery0 temperature outside boundary
Welcome to Linux!
         Expecting device dev-ttyMFD2.device...

[  OK  ] Reached target Remote File Systems.

         Expecting device dev-disk-by\x2dpartlabel-rootfs.device...

         Expecting device dev-disk-by\x2dpartlabel-factory.device...

         Expecting device dev-disk-by\x2dpartlabel-update.device...

         Expecting device dev-disk-by\x2dpartlabel-home.device...

         Expecting device sys-subsystem-net-devices-usb0.device...

[  OK  ] Reached target Paths.

[  OK  ] Reached target Swap.

[  OK  ] Created slice Root Slice.

[  OK  ] Created slice User and Session Slice.

[  OK  ] Listening on Delayed Shutdown Socket.

[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.

[  OK  ] Listening on udev Control Socket.

[  OK  ] Listening on udev Kernel Socket.

[  OK  ] Listening on Journal Socket.

[  OK  ] Created slice System Slice.

         Mounting Temporary Directory...

         Starting Load Kernel Modules...

         Starting Create list of required static device nodes...rrent kernel...

         Starting udev Coldplug all Devices...

[  OK  ] Created slice system-getty.slice.

[  OK  ] Created slice system-serial\x2dgetty.slice.

         Mounting Debug File System...

         Mounting POSIX Message Queue File System...

         Starting Apply Kernel Variables...

         Starting Journal Service...

[  OK  ] Started Journal Service.

[  OK  ] Reached target Slices.

         Starting Remount Root and Kernel File Systems...

[  OK  ] Set up automount boot.automount.

[  OK  ] Mounted POSIX Message Queue File System.

[  OK  ] Mounted Debug File System.

[  OK  ] Mounted Temporary Directory.

[  OK  ] Started Load Kernel Modules.

[  OK  ] Started Create list of required static device nodes ...current kernel.

[  OK  ] Started Apply Kernel Variables.

[  OK  ] Started Remount Root and Kernel File Systems.

[  OK  ] Started udev Coldplug all Devices.

         Starting Load/Save Random Seed...

         Starting Create Static Device Nodes in /dev...

         Mounting Configuration File System...

         Mounting FUSE Control File System...

[  OK  ] Mounted FUSE Control File System.

[  OK  ] Mounted Configuration File System.

[  OK  ] Started Load/Save Random Seed.

[  OK  ] Started Create Static Device Nodes in /dev.

         Starting udev Kernel Device Manager...

[  OK  ] Reached target Local File Systems (Pre).

         Mounting /var/volatile...

[  OK  ] Started udev Kernel Device Manager.

[  OK  ] Mounted /var/volatile.

[  OK  ] Reached target Local File Systems.

         Starting Trigger Flushing of Journal to Persistent Storage...

         Starting Create Volatile Files and Directories...

[  OK  ] Started Create Volatile Files and Directories.

[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.

[  OK  ] Found device /sys/subsystem/net/devices/usb0.

[  OK  ] Found device /dev/ttyMFD2.

[  OK  ] Created slice system-systemd\x2drfkill.slice.

         Starting Load/Save RF Kill Switch Status of rfkill2...

         Starting Load/Save RF Kill Switch Status of rfkill0...

         Starting Load/Save RF Kill Switch Status of rfkill1...

         Starting Opkg first boot configure...

         Starting Network Time Synchronization...

         Starting Update UTMP about System Boot/Shutdown...

[  OK  ] Started Load/Save RF Kill Switch Status of rfkill2.

[  OK  ] Started Load/Save RF Kill Switch Status of rfkill0.

[  OK  ] Started Load/Save RF Kill Switch Status of rfkill1.

[  OK  ] Started Network Time Synchronization.

[  OK  ] Found device /dev/disk/by-partlabel/factory.

[  OK  ] Started Update UTMP about System Boot/Shutdown.

[  OK  ] Found device /dev/disk/by-partlabel/update.

[  OK  ] Found device /dev/disk/by-partlabel/rootfs.

[  OK  ] Found device /dev/disk/by-partlabel/home.

[  OK  ] Started Opkg first boot configure.

         Mounting Mount for factory...

[  OK  ] Reached target System Initialization.

[  OK  ] Listening on RPCbind Server Activation Socket.

[  OK  ] Reached target Timers.

         Starting Restore Sound Card State...

[  OK  ] Listening on D-Bus System Message Bus Socket.

[  OK  ] Mounted Mount for factory.

[  OK  ] Listening on sshd.socket.

[  OK  ] Reached target Sockets.

[  OK  ] Reached target Basic System.

         Starting Edison PWR button handler...

[  OK  ] Started Edison PWR button handler.

         Starting Telephony service...

         Starting Daemon to load edison mcu app binary...

[  OK  ] Started Daemon to load edison mcu app binary.

         Starting Daemon to handle arduino sketches...

Application available at (physical) address 0x04819000

        VRL mapped to 0xff217000

        App size = 11508 bytes
        App Authentication feature is disabled!

        Resetting IPC
*** Ready to receive application ***

[  OK  ] Started Daemon to handle arduino sketches.

         Starting Daemon to reset sketches...

[  OK  ] Started Daemon to reset sketches.

         Starting Bluetooth rf kill event daemon...

[  OK  ] Started Bluetooth rf kill event daemon.

         Starting Start or stop WiFI AP Mode in Edison...

[  OK  ] Started Start or stop WiFI AP Mode in Edison.

         Starting Login Service...

         Starting Permit User Sessions...

         Starting Post install service...

         Starting Watchdog sample daemon...

[  OK  ] Started Watchdog sample daemon.

         Starting Crashlog service...

[  OK  ] Started Crashlog service.

         Starting Generate unique machine-id...

         Starting Cleanjournal service...

[  OK  ] Started Cleanjournal service.

         Starting D-Bus System Message Bus...

[    9.913329] sh[218]: Starting Post Install (try: 0)

[  OK  ] Started D-Bus System Message Bus.

[  OK  ] Started Telephony service.

         Starting Network Service...

[  OK  ] Started Restore Sound Card State.

[  OK  ] Started Permit User Sessions.

[  OK  ] Started Network Service.

[   10.368966] systemd-machine-id-setup[247]: Initializing machine ID from random generator.

[   10.682053] systemctl[250]: rm '/etc/systemd/system/basic.target.wants/edison-machine-id.service'

[  OK  ] Started Generate unique machine-id.

[  OK  ] Started Login Service.

         Starting Bluetooth service...

         Starting Edison Arduino board LED Blinker...

[  OK  ] Started Edison Arduino board LED Blinker.

         Starting Network Name Resolution...

[   11.864772] sh[218]: Backup home/root contents of rootfs : Success

         Starting PulseAudio Sound System...

[  OK  ] Created slice system-systemd\x2dfsck.slice.

         Starting File System Check on /dev/disk/by-partlabel/boot...

[  OK  ] Reached target Network.

         Starting Zero-configuration networking...

[   11.930911] sh[218]: mke2fs 1.42.9 (28-Dec-2013)

         Starting Mosquitto - lightweight server implementati...SN protocols...

         Starting Getty on tty1...

[  OK  ] Started Getty on tty1.

[  OK  ] Started Network Name Resolution.

[  OK  ] Started Mosquitto - lightweight server implementatio...T-SN protocols.

[  OK  ] Started Bluetooth service.

[  OK  ] Started Zero-configuration networking.

[   12.552068] systemd-fsck[271]: dosfsck 2.11, 12 Mar 2005, FAT32, LFN

[   12.554520] systemd-fsck[271]: /dev/mmcblk0p7: 5 files, 2742/2971 clusters

[  OK  ] Started File System Check on /dev/disk/by-partlabel/boot.

         Mounting /boot...

         Starting The Edison status and configuration service...

[  OK  ] Started The Edison status and configuration service.

         Starting Intel_XDK_Daemon...

[  OK  ] Started Intel_XDK_Daemon.

         Starting Hostname Service...

[  OK  ] Mounted /boot.

[  OK  ] Started Hostname Service.

[   13.577704] sh[218]: Discarding device blocks: done

[   13.606481] sh[218]: Filesystem label=

[   13.649554] sh[218]: OS type: Linux

[   13.680311] sh[218]: Block size=4096 (log=2)

[   13.712396] sh[218]: Fragment size=4096 (log=2)

[   13.782400] sh[218]: Stride=0 blocks, Stripe width=0 blocks

[   13.815728] sh[218]: 87120 inodes, 348155 blocks

[   13.892418] sh[218]: 0 blocks (0.00%) reserved for the super user

[   13.982537] sh[218]: First data block=0

[   14.052355] sh[218]: Maximum filesystem blocks=356515840

[   14.082910] sh[218]: 11 block groups

[   14.152498] sh[218]: 32768 blocks per group, 32768 fragments per group

[   14.220999] sh[218]: 7920 inodes per group

[   14.272610] sh[218]: Superblock backups stored on blocks:

[   14.312192] sh[218]: 32768, 98304, 163840, 229376, 294912

[   14.344848] sh[218]: Allocating group tables: done

[   14.432545] sh[218]: Writing inode tables: done

[   14.508934] sh[218]: Creating journal (8192 blocks): done

[  OK  ] Started PulseAudio Sound System.

[   17.161726] sh[218]: Writing superblocks and filesystem accounting information: done

[   17.236067] sh[218]: Formatting home partition : Success

[   17.257604] sh[218]: Mount /home partition : Success

[   17.294885] sh[218]: Restore home/root contents on new /home partition : Success

[   17.327314] sh[218]: The number of cylinders for this disk is set to 24576.

[   17.346005] sh[218]: There is nothing wrong with that, but this is larger than 1024,

[   17.376037] sh[218]: and could in certain setups cause problems with:

[   17.423802] sh[218]: 1) software that runs at boot time (e.g., old versions of LILO)

[   17.451555] sh[218]: 2) booting and partitioning software from other OSs

[   17.493093] sh[218]: (e.g., DOS FDISK, OS/2 FDISK)

[   17.541465] sh[218]: Command (m for help): Command action

[   17.590630] sh[218]: e   extended

[   17.638059] sh[218]: p   primary partition (1-4)

[   17.700937] sh[218]: Partition number (1-4): Partition 1 is already defined, delete it before re-adding

[   17.732539] sh[218]: Command (m for help): Command (m for help): Command (m for help): Selected partition 1

[   17.812052] sh[218]: Hex code (type L to list codes):

[   17.882447] sh[218]: Command (m for help):

[   17.971526] sh[218]: Disk /dev/disk/by-partlabel/update: 805 MB, 805306368 bytes

[   18.032447] sh[218]: 4 heads, 16 sectors/track, 24576 cylinders

[   18.092569] sh[218]: Units = cylinders of 64 * 512 = 32768 bytes

[   18.106560] sh[218]: Device Boot      Start         End      Blocks  Id System

[   18.142419] sh[218]: /dev/disk/by-partlabel/update1               1       24576      786424   b Win95 FAT32

[   18.497023] sh[218]: Command (m for help): The partition table has been altered.

[   18.532201] sh[218]: Calling ioctl() to re-read partition table

[   18.582221] sh[218]: fdisk: WARNING: rereading partition table failed, kernel still uses old table: Invalid argument

[   18.668649] sh[218]: Formatting update partition Step 1 : Success

[   18.725650] sh[218]: Formatting update partition Step 2 : Success

[   18.803499] sh[218]: mkfs.vfat 2.11 (12 Mar 2005)

[   18.873781] sh[218]: Loop device does not match a floppy size, using default hd params

[   18.927481] sh[218]: Formatting update partition Step 3 : Success

[   18.978933] sh[218]: Formatting update partition Step 4 final : Success

[   32.565980] sh[218]: Generating sshd keys : Success

[   32.614420] sh[218]: Update file system table /etc/fstab : Success

[   33.892588] sh[218]: Generating Wifi Access Point SSID and passphrase : Success

[   33.955371] sh[218]: Post install success

[   34.075310] sh[218]: No journal files were found.

[   35.265506] systemctl[389]: rm '/etc/systemd/system/basic.target.wants/post-install.service'

[  OK  ] Started Post install service.

         Starting Serial Getty on ttyMFD2...

[  OK  ] Started Serial Getty on ttyMFD2.

[  OK  ] Reached target Login Prompts.

         Starting Increases rootfs image size to fit partition...

[   36.488949] resize2fs[400]: resize2fs 1.42.9 (28-Dec-2013)

[   36.556575] resize2fs[400]: Filesystem at /dev/disk/by-partlabel/rootfs is mounted on /; on-line resizing required

[   36.602177] resize2fs[400]: old_desc_blocks = 1, new_desc_blocks = 1

[   36.652218] resize2fs[400]: The filesystem on /dev/disk/by-partlabel/rootfs is now 393216 blocks long.

[   36.774761] systemctl[402]: rm '/etc/systemd/system/default.target.wants/resize-rootfs.service'

[  OK  ] Started Increases rootfs image size to fit partition.

[  OK  ] Reached target Multi-User System.
Poky (Yocto Project Reference Distro) 1.7.2 edison ttyMFD2

edison login: root root@edison:~# cat /etc/version weekly-159.devkit-2.0 root@edison:~# uname -a Linux edison 3.10.17-poky-edison+ #1 SMP PREEMPT Fri Jun 19 12:06:40 CEST 2015 i686 GNU/Linux root@edison:~#

このページを見た人は、以下のページも見ています。

git config alias.fetch-pulls=fetch origin +refs/pull/:refs/remotes/pull/

admin — Wed, 26 Aug 2015 12:57:47 +0000

git config alias.fetch-pulls=fetch origin +refs/pull/*:refs/remotes/pull/*

このページを見た人は、以下のページも見ています。

au one Marketアプリの再インストール方法

admin — Wed, 26 Aug 2015 11:46:19 +0000

export GOPATH=~/ #export GOROOT=${GOPATH}

function peco-src () { local selected_dir=$(ghq list -p | peco --query "$LBUFFER") if [ -n "$selected_dir" ]; then BUFFER="cd ${selected_dir}" zle accept-line fi zle clear-screen } zle -N peco-src bindkey '^[' peco-src

url for opkg

admin — Sun, 15 Mar 2015 12:43:02 +0000

tee /etc/opkg/base-feeds.conf << _EOF_ >/dev/null src/gz all http://repo.opkg.net/edison/repo/all src/gz core2-32 http://repo.opkg.net/edison/repo/core2-32 _EOF_

src/gz edison http://repo.opkg.net/edison/repo/edison
を削除。

tee /etc/opkg/intel-iotdk.conf << _EOF_ >/dev/null src intel-all http://iotdk.intel.com/repos/1.1/iotdk/all src intel-iotdk http://iotdk.intel.com/repos/1.1/intelgalactic src intel-quark http://iotdk.intel.com/repos/1.1/iotdk/quark src intel-i586 http://iotdk.intel.com/repos/1.1/iotdk/i586 src intel-x86 http://iotdk.intel.com/repos/1.1/iotdk/x86 _EOF_

echo "src mraa-upm http://iotdk.intel.com/repos/1.1/intelgalactic" > /etc/opkg/mraa-upm.conf opkg update opkg install opkg install libmraa0

opkg update && opkg upgrade

opkg install bash && opkg install less && opkg install git

opkg install bash
opkg install less
opkg install git

chsh -s /bin/bash

vi /lib/systemd/system/sshd.socket

add # to BindToDevice=usb0 with a #

opkg install libmraa0

ifconfig usb0 down && ifconfig wlan0 down && ifconfig wlan0 up

このページを見た人は、以下のページも見ています。

メモリリークを発見！Androidアプリのメモリ解析手法

http://iotdk.intel.com/sdk/upm-update/

admin — Wed, 11 Mar 2015 14:23:40 +0000

http://iotdk.intel.com/sdk/mraa-update/
http://iotdk.intel.com/sdk/upm-update/
http://iotdk.intel.com/sdk/1.1/

このページを見た人は、以下のページも見ています。

Intel Edison R2 Firmware beta resolved issue

admin — Sun, 08 Feb 2015 09:27:57 +0000

Inten Edison R2ファームウェアで解決済みなissueは以下です。

EDISON-1801
- Wi-Fi latency is higher than expected.

EDISON-1803
- No option available to exit Wi-Fi setup in configure_edison.

EDISON-1810
- Unable to pair with BLE-enabled Wahoo fitness cheststrap.

EDISON-1812
- Unable to connect Intel® Edison via Intel® Edison Wi-Fi AP mode.

EDISON-1815
- FTDI USB serial not recognized in Windows 8.1 host.

EDISON-1827
- Warning at boot: dwc3-device dwc3-device.1: dwc3-gadget is already bound to g_multi.

EDISON-1848
- Kernel traces duplicated in the journal.

EDISON-1864
- sshd doesn’t autostart and will not manually start.

EDISON-1866
- Linux-Arduino sketch sharing.

EDISON-1872
- Error while generating/copying u-boot upstream patch on Jenkins.

EDISON-1880
- Using the breakout board with Bluetooth* and Wi-Fi enabled, a Bluetooth* scan causes a reboot.

EDISON-1882
- Wi-Fi: Fix netmask option in udhcp conf for hostapd.

EDISON-1890
- Windows 8.1 and FTDI USB serial not recognized.

EDISON-1902
- Close POODLE SSLv3 security vulnerability (CVE-2014-3566).

EDISON-1904
- Wi-Fi: Align hostapd.conf with the default AP mode in the firmware.

EDISON-1905
- rfcomm tool leads to a crash.

EDISON-1908
- Crash while switching OTG with ACS.

EDISON-1911
- SEGFAULT is received when SD card is removed from the SD card slot.

EDISON-1912
- iotkit-admin components returns nothing.

EDISON-1913
- systemctl status iotkit-agent shows status as failed.

EDISON-1915
- configure_edison script doesn’t print clean countdown msg during scan.

EDISON-1916
- Time is changed at NTP activation without NTP server.

EDISON-1918
- Wi-Fi errors at boot.

EDISON-1920
- Can’t flash a different rootfs size without xfstk installed.

EDISON-1922
- MDNS daemon error on startup.

EDISON-1923
- XDK daemon needs to restart if mdns daemon restarts.

EDISON-1956
- Local commit on kernel and u-boot are not taken into account while creating src_package.

EDISON-1977
- libreadline: Segmentation fault.

EDISON-1993
- Unicode conversion failed.

EDISON-1997
- Reboot OTA fails to load g_multi module.

EDISON-2008
- Missing cross-compile toolchain for Win32 and Win64 SDK.

EDISON-2009
- PWM is not working properly when accessed through MRAA.

EDISON-2014
- Long pulse on SPI SCK is back again.

EDISON-2015
- Journal log file grows after each reboot, leading to roots getting full.

EDISON-2034
- Medium and maximal frequency on PWM0 generate rebounds.

EDISON-2132
- Option order matters in flashall command.

EDISON-2139
- UART and SSH console is broken after exiting connmanctl with Ctrl+C.

EDISON-2140
- Problem flashing images using the flashall script due to missing .js handler.

EDISON-2144
- NPM fails to fetch some packages.

EDISON-2153
- iotkit-comm-c file missing in documentation.

EDISON-2162
- Wi-Fi: IBSS mode not working.

EDISON-2165
- FTP transfer during Wi-Fi failover roaming.

EDISON-2175
- “mesg” command missing but referred to in /etc/skel/.profile.

EDISON-2194
- Unable to generate authentication keys using iotkit-comm setupAuthentication.

EDISON-2213
- “bitbake -c [devshell | menuconfig] linux-yocto” nonfunctional.

EDISON-2226
- Fails to start the systemd-hostnamed service.

EDISON-2227
- wpa_supplicant is flooding the syslog.

EDISON-2229
- P2P multirole is unstable.

EDISON-2238
- BT connection over FTP Is failing.

EDISON-2248
- iotkit-lib-c: warning: Incompatible implicit declaration of built-in function.

EDISON-2249
- ZMQ server client fails to communicate after setupAuthentication is completed.

EDISON-2263
- Wi-Fi: P2P connection issue when country code XV/23 or XV25 is used.

EDISON-2264
- BT-PAN connection failed using connman.

EDISON-2275
- [AUDIO] Alsactl complains about unsupported control.

EDISON-2278
- Wi-Fi: Missing driver parameter when loading the driver with P2P support.

EDISON-2289
- Change OOBE license file.

EDISON-2301
- Wi-Fi: Connection breaks after soft unblocking BT.

EDISON-2302
- Cloud data subscription feature doesn’t work.

EDISON-2308
- FOTA update does not work due to /etc/version format change.

EDISON-2310
- Can’t send SPI message for SPI 32-bit test.

EDISON-2324
- Flashall.bat does not handle errors well.

EDISON-2330
- Wi-Fi: Connman connection takes sometimes 30 seconds.

EDISON-2331
- OTA firmware upgrade does not work.

EDISON-2332
- configure_edison –version command is not returning the current version of the Intel® Edison device’s firmware.

EDISON-2333
- Wi-Fi Scan list from configure_edison –wifi or –setup shows invalid SSID name/characters(\x00 \x00).

EDISON-2337
- ZMQ/MQTT server client fails to communicate after setupAuthentication is completed.

EDISON-2339
- Unable to browse device contents after using obex connect.

EDISON-2342
- XDK-daemon error: dns service error: Bad reference is continuously seen in journal log.

EDISON-2343
- Secure mqtt client does not connect to mqtt service on LAN.

EDISON-2345
- configure_edison –version.

EDISON-2349
- Increase rootfs size.

EDISON-2351
- The notice “board need reboot twice” is still on command line, since the board is only booting once.

EDISON-2359
- systemd home.mount warning after flashing the board.

EDISON-2360
- UART used for BT chip communication doesn’t resume.

EDISON-2364
- Cloud data subscription feature doesn’t work in iotkit-comm-c.

EDISON-2365
- No command prompt after flashing engineering build 1888.

EDISON-2367
- Debian image generation broken and does not increase rootfs size.

EDISON-2379
- Wi-Fi: create IBSS works, but join an existing IBSS does not work.

このページを見た人は、以下のページも見ています。

サイトマップ

admin — Thu, 31 Dec 2009 16:01:27 +0000